Rib trim, rib tape or reversible: 4 basketball uniform details
Two basketball uniforms can share the same print and still look nothing alike once the team walks out. The difference is usually in the small parts: the trim on the neck and armholes, how a side panel carries onto the shorts, the side seam, and whether the jersey turns inside out. Here are four details to settle before you sign off a mock-up, shown on six sets from our catalogue.
Why the details decide the look
Most teams spend their time on the main print and the colours. Fair enough. But the trim, the seams and the build are what people notice up close, and they are much harder to change after cutting. A rib trim colour is one line on the tech pack. Getting it wrong means a full reprint.
Detail 1: Two-colour rib trim and rib tape
A plain self-fabric binding on the neck does the job. A two-colour rib trim makes the jersey look finished. We're seeing more teams ask for it on V-necks, scoop necks, armholes and shorts leg openings, often with notched side seams on the shorts to match.
The crimson set below goes one step further. The all-over tonal wave print stays quiet, so the white and black rib tape on the scoop neck, armholes and hems does most of the work. It's on 160 GSM polyester.
Detail 2: Retro chevrons on a light base
Cream is back on courts. Paired with forest green chevron side panels, a thin gold accent and a matte mesh, it gives a vintage look without going full throwback. A light base also shows sublimated colour more cleanly than black does.
One thing to know: cream shows dirt sooner than dark colours. For a home set that's fine. For a travel or tournament set, many teams keep a darker away kit next to it.
What to confirm on a light-base uniform
- Base shade. Approve cream on a printed swatch. It can drift towards white or towards yellow on screen.
- Accent line width. A thin gold line looks sharp at 1 metre and disappears at 20. Ask how it reads from a distance.
- Number colour. Dark numbers on a light base, with an outline in the panel colour.
- Away kit. Decide now whether you need a second, darker set in the same layout.
Detail 3: Gradient side panels that carry onto the shorts
A side panel that stops at the jersey hem looks cut off. When the panel continues down the shorts, the set looks like one piece in motion. Both sets here are built that way.
The panel should run from armhole to shorts hem in one line. What we check on every basketball mock-up
The black and purple set is on 160 GSM polyester. The grey herringbone set is around 180 GSM, with elastic waistbands on the shorts. With sublimation, the gradient is dyed into the polyester, so there is no print layer at the seams to crack or peel.
Questions about this? Ask New You Sports directly.
Send your quantity and requirements. The supplier replies to you on PakGoo.
Detail 4: A reversible build
A reversible jersey gives you two colours in one garment. It works well for training groups, camps and leagues where teams switch between home and away from game to game. The charcoal set below has an all-over shattered glass print with volt angular side panels and a two-tone volt and charcoal rib trim on the scoop neck and armholes.
Numbers go on both sides of a reversible, so plan them on both faces of the mock-up. Keep both sides in strong contrast, or one side will look washed out next to the other.
Four details side by side
| Detail | What it changes | Shown on | Ask about |
|---|---|---|---|
| Two-colour rib trim or tape | Neck, armholes and leg openings look finished | Maroon colour block, red tonal wave | Trim colours and neck shape (V or scoop) |
| Retro chevrons on a light base | Vintage look, clean sublimated colour | Cream retro chevron | Base shade on a swatch, a darker away set |
| Panels onto the shorts | Jersey and shorts read as one design | Black purple angular, grey herringbone | Panel line matching at the hem |
| Reversible build | Two colours in one garment | Charcoal shattered glass | Numbers and contrast on both sides |
How to order with the right details
- Choose a set and list the details
Pick the base design, then write down trim colours, neck shape, side seams and whether you want a reversible build.
- Approve the mock-up
We send front and back views with names, numbers and trim colours drawn in. Check the panel line from jersey to shorts here.
- Production and shipping
Production takes 12 to 18 days after mock-up approval. We quote FOB Sialkot, and delivered prices are available on request.
Checklist before you approve
- Rib trim colours are named on the tech pack, for neck, armholes and leg openings.
- Neck shape is confirmed: V-neck or scoop neck.
- Shorts side seam is confirmed: straight or notched.
- Side panels line up from jersey hem to shorts.
- Numbers are placed on both faces if the set is reversible.
- Youth and adult quantities are listed separately, since they come from separate patterns.
Questions buyers ask
Can I change the rib trim colours on any of these sets?
Yes. Trim colours are set on the tech pack, so you can match them to your team colours on any set shown here.
What is the minimum order?
10 pieces per design, and you can mix sizes within that. Prices drop at 50, 100 and 500 pieces.
Do you make youth sizes?
Yes. Youth and adult sizes are cut from separate patterns, so the fit and the panel placement work on both.
Will the print crack where the panels cross the seams?
No. Sublimation dyes the design into the polyester, so there is no layer on top to crack or peel, at the seams or anywhere else.
How long does an order take?
12 to 18 days of production after you approve the mock-up, plus shipping. We quote FOB Sialkot and can give a delivered price on request.
For next season's basketball uniforms, send New You Sports your team colours and the details you want, and we will draw them into a mock-up.
Ready to work with New You Sports?
Send your inquiry and get a reply from the supplier.
