Sublimated wrestling singlets: 4 looks, from facets to pixels
A wrestling singlet has almost no room for design. There are no sleeves, no collar and very little chest, so nearly everything happens on the side panels and in the fade between two colours. These are the seven singlets we've added for the winter season, grouped into four looks.
Why the side panel carries the design
On the mat, people mostly see a wrestler from the side or from behind. Shoulders are low, the body turns all the time and the front is often pressed against the opponent. That's why the strongest singlet designs put the team colour on the chest and back, then use the side panel, from underarm to thigh, for the graphic.
All seven singlets below are fully sublimated on a 180 GSM polyester and spandex blend. The colour is dyed into the fibre, so a gradient can run across a seam and the panel art can be as detailed as you like.
Look 1: Geometric facets and prisms
Triangle facets break the side panel into sharp shapes that fade from one colour into the next. A thin metallic stripe along the panel edge keeps it tidy. We'd keep this look to two or three graphic elements at most, otherwise it gets busy at close range.
Look 2: Stepped chevron panels
A chevron stacked down the side reads as movement even when the wrestler is standing still. On the blue and gold singlet the body fades from royal blue to deep navy at the legs, so the gold chevrons sit on a darker base and show up clearly in a bright gym.
Look 3: All-over texture with a gradient panel
This look adds a quiet tonal print across the whole body, then puts the bright colour on the side panel. From a distance it reads as one colour. Up close you see the texture. It also hides small marks better than a flat block of colour does.
Two textures we print most
- Topographic contours. Thin wavy lines, like a map. On the maroon singlet they sit under silver gradient side panels and a racerback.
- Scale or arc pattern. Small repeating curves. On the navy singlet they pair with bright orange side panels that blend into the body across the torso.
- Tone on tone. Both prints use a shade close to the base colour, so names and logos still read cleanly on top.
Quiet on the body, loud on the side. How we lay out a singlet
Questions about this? Ask New You Sports directly.
Send your quantity and requirements. The supplier replies to you on PakGoo.
Look 4: Pixel fades and clean colour blocks
Two very different ways to use two colours. The green singlet dissolves from black at the hips into kelly green at the chest through a pixel mosaic, with thin white piping on the side seams and leg openings. The teal singlet keeps it simple: a bright body, charcoal side panels and white piping along the panel edges.
The four looks side by side
| Look | Where the design sits | Reads best | Good choice if |
|---|---|---|---|
| Facets and prisms | Side panel, with metallic edge stripes | Close up and on camera | You want a sharp, modern look |
| Stepped chevrons | Underarm to thigh | From the stands | Your colours contrast strongly |
| Texture plus gradient panel | Whole body, bright panel on the side | At any distance | You add names or logos on top |
| Pixel fade or colour block | Across the torso, or the panel only | From the stands | You want two colours and little else |
How an order runs
- Pick a look and send your colours
Choose one of the designs above, or send your own idea. Add your colour codes, logo files and any names or numbers.
- Approve the mock-up
We send a digital mock-up of the front, back and side. Check the side panel closely, since that's where most of the design is.
- Production and shipping
Production takes 12-18 days after you approve the mock-up. Prices are FOB Sialkot, and we can quote delivered to your door on request.
Checklist before you order
- I've read our league or school rules on singlet cut and colour.
- I've chosen high-cut or racerback for the whole team.
- I've sent exact colour codes, not a photo of last year's kit.
- I've checked youth and adult sizes against the measurement chart.
- I've looked at the side view on the mock-up.
- I know my quantity, so I know which price tier I'm in.
Questions buyers ask
What is the minimum order for wrestling singlets?
10 pieces, and you can mix sizes in that order. The price per piece drops at 50, 100 and 500 pieces.
What fabric are the singlets made from?
A 180 GSM polyester and spandex blend with four-way stretch. It moves with the body and dries quickly.
Will the print crack when the singlet stretches?
No. Sublimation dyes the design into the polyester, so there is no layer on top to crack or peel, even when the fabric stretches hard.
Can we change the colours of a design shown here?
Yes. Every design can be printed in your team colours, with your logo, names and numbers. The mock-up shows the change before anything is printed.
How long does an order take?
12-18 days of production after you approve the mock-up, then shipping. Ask us for a delivered quote if you'd rather not arrange freight from Sialkot.
For singlets this season, message New You Sports with your colours and quantity, and we'll send a mock-up of the look you like.
Ready to work with New You Sports?
Send your inquiry and get a reply from the supplier.